This price list is effective as of January 1, 2013. East Creek Precision reserves the right to change prices at any time.
| GENERAL SERVICES: |
|
| Service charge per hour |
$60.00 |
| Machine time on mill, lathe or surface grinder per hour |
$20.00 |
| Minimum service charge per firearm |
$25.00 |
| Written cost estimates (in addition to minimum service charge) |
$20.00 |
| Detailed disassembly, cleaning, lubrication and reassembly (minimum) |
$50.00 |
|
|
| METAL FINISHING: (may vary based on type and condition of firearm) |
|
| Hot salt bluing |
$200.00 |
| Rust bluing |
$310.00 |
| Parkerizing (gray or black) |
$200.00 |
| Spray on thermoset finishes (multiple colors or patterns are extra) |
$200.00 |
| Disassemble and reassemble firearm for finishing (minimum) |
$30.00 |
|
|
| SIGHTS: |
|
| Sight in firearm on range (ammunition and targets are extra) Hourly rate |
|
| Bore sight scoped rifle or scoped shotgun |
$20.00 |
| Pattern shotgun (ammunition and targets are extra) |
Hourly rate |
| Drill and tap shotgun receiver for scope base (minimum per hole) |
$15.00 |
| Drill, tap and mount scope and bore sight shotgun (minimum) |
$75.00 |
| Drill and tap rifle receiver for scope base (minimum per hole) |
$20.00 |
| Drill, tap and mount scope and bore sight rifle (minimum) |
$95.00 |
| Install sight ramp (tap/thread or silver solder – refinishing extra) |
$40.00 |
| Make custom front or rear iron sights |
Hourly rate plus machine time |
| Install front or mid-rib sight bead on shotgun, per bead |
$15.00 |
| Scope mounting, including truing and lapping rings, and bore sighting |
$30.00 |
| Make custom scope base(s) |
Hourly rate plus machine time |
| Cut standard dovetail |
$40.00 |
| Cut special contour dovetail |
Hourly rate plus machine time |
|
|
| GENERAL REPAIRS: |
|
| Function test firearm in shop with inert ammunition (minimum) |
$25.00 |
| Function test firearm at range with live ammunition (ammunition extra) |
Hourly rate |
| Check head space |
$25.00 |
| Check firing pin protrusion |
$25.00 |
| Cast chamber (minimum) |
$35.00 |
| Removed fired casing from chamber |
Hourly rate |
| Remove live ammunition from chamber |
Hourly rate plus $25.00 |
| Remove obstruction, fouling, lead from bore |
Hourly rate |
| Cut and crown rifle or pistol barrel (minimum) |
$60.00 |
| Welding up new bolt handle (does not include materials or stock work) |
$50.00 |
| Set up adjustable trigger |
$30.00 |
| Trigger job, non-adjustable (does not include spring kits or other materials, some |
|
| revolvers, shotguns and double-set triggers may cost more) |
$60.00 |
|
|
| SHOTGUN REPAIRS: |
|
| Polish chamber |
$20.00 |
| Polish bore (minimum cost depending upon bore condition) |
$40.00 |
| Lengthen forcing cone |
$45.00 |
| Back bore |
$90.00 |
| Open choke (per barrel) |
$40.00 |
| Install screw-in type choke tubes (per barrel, 12 ga.) |
$90.00 |
| Port shotgun barrel (minimum) |
$90.00 |
| Port O/U or S/S shotgun barrel (minimum) |
$120.00 |
|
|
| HANDGUN REPAIRS: |
|
| Chamfer revolver barrel |
$30.00 |
| Chamfer revolver cylinder |
$30.00 |
| Revolver action job (minimum, does not include parts) |
$90.00 |
| Re-barrel revolver (minimum, does not include new barrel or other parts) |
$95.00 |
| Set barrel/cylinder gap (does not include parts) |
$90.00 |
| Semi-auto action job (1911 typical, does not include parts) |
$90.00 |
| Fit barrel to 1911 auto (does not include barrel or link parts) |
$60.00 |
| Throat and polish chamber mouth and feed ramp |
$30.00 |
| Fit trigger to 1911 auto (does not include trigger) |
$30.00 |
| Fit hammer to 1911 auto (does not include hammer or hammer pin) |
$30.00 |
| Fit 1911 auto frame for beavertail grip safety (does not include parts or |
|
| refinishing frame and safety) |
$60.00 |
|
|
| RIFLE REPAIRS: |
|
| Re-barrel bolt action rifle with short chambered, threaded and contoured barrel |
|
| (does not include cost of barrel or refinishing gun, semi-auto, pump and |
|
| lever guns are higher) |
$90.00 |
| Re-barrel bolt action rifle with contoured only barrel (minimum – see above) |
$150.00 |
| Re-barrel bolt action rifle with barrel blank (minimum – see above) |
$230.00 |
|
|
| STOCK WORK: |
|
| Hunter oil finish on walnut (light sanding only, grain is left unfilled) |
$90.00 |
| Deluxe oil finish on walnut (light sanding only, grain is filled, low gloss) |
$120.00 |
| Glass bedding barreled bolt action rifle (does not include materials) |
$90.00 |
| Pillar bedding barreled bolt action rifle (does not include materials) |
$80.00 |
| Install recoil pad or flat butt plate (does not include parts or materials) |
$50.00 |
| Install adjustable butt plate (does not include parts or materials) |
$60.00 |
| Install sling swivel studs in walnut stock (does not include parts) |
$25.00 |
| Inletting and finishing of a 90% machine inlet walnut stock (no checkering, butt plate, |
|
| grip cap, sling swivels or metal stock hardware, hunter oil finish) |
$420.00 |
| Fit, bed and finish fiberglass stock (one color spray on finish only, does not |
|
| include metal stock hardware or recoil pad) |
$200.00 |
